Filter
Top Products
4
· Tuner memory, number of channels: 256
· Auto & manual programmable scan
· Real time On/Off programmable timer
· Menu on Russian and English languages
· AV jacks: full SCART, side AV in
· Noise reduction
· Game
· Calendar
· Biological clock
· Child lock
· Clock
· Power consumption 150 W
· Wide range power supply 220 V, 50 Hz
· Multifunctional Remote Control
Preparation
Connecting to an aerial or cable television network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- an outdoor aerial;
- a cable television network.
1. Connect the aerial or network input cable to the coaxial socket on the rear of the television.
2. Insert the plug into the power supply.
3. Turn the unit power on.
Note: The power turns off approximately 30 minutes after a TV station has stopped broadcasting.
Inserting the batteries in the remote control
1. Detach the battery cover on the rear of the remote control and insert two batteries size AAA according to the diagram in the battery compartment.
2. Press the POWER button on the remote control and TV screen should light up.