Filter
Top Products
CHANNEL
49
How to Store Channels Automatically
- Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air”
(antenna) and cable channels.
- Before your television can begin memorizing the available channels, make sure to specify the type of the
signal source (antenna or cable) connected to your TV.
1
2
3
4
5
6
Press Menu button.
Menu items appear on the screen.
Press Up and Down buttons to move to .
Press
button to select .
AUTO STORE is highlighted.
Press button to select “AUTO STORE”.
AUTO STORE menu items appear.
Press Left and Right buttons to select the type
of antenna connection.
- In case of ATV/DTV (ANT1) :
When watching both analog broadcast and digital
broadcast at the same time with ANT1
Press Up and Down buttons to move to AIR TV or CATV.
• AIR ONLY : Watching the analog over-the-air and
digital over-the-air signals via ANT1 input port.
• CABLE ONLY : Watching the Cable and digital cable
signals via ANT1 input port.
- In case of ATV (ANT1) + DTV (ANT2) :
When watching analog broadcast with ANT1 and digital broadcast with ANT2.
Press Up and Down buttons to move AIR + AIR, AIR + CABLE or CABLE + AIR.
• AIR(ANT1)+AIR(ANT2) : Watching the analog over-the-air via ANT1 input port and the digital
over-the-air signal via ANT2 input port.
• AIR(ANT1)+CABLE(ANT2) : Watching the analog over-the-air via ANT1 input port and the digital
cable via ANT2 input port.
• CABLE(ANT1)+AIR(ANT2) : Watching the analog cable via ANT1 input port and the digital over-
the-air via ANT2 input port.
Press Left and Right buttons to set up CABLE BAND.
*CABLE BAND NOTE : STD (Standard), HRC (HRC band), IRC (IRC band)
(For further band information, contact your cable service provider.)