Filter
Top Products
7
Using the iD84
3. You can set up to 12 presets (6 AM, 6 FM).To memorize a station as a preset:
A. Press the Mode Button to select the desired AM or FM band.
B. Press the Preset Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and
then hold the Preset Button until the selected preset number begins flashing in the display.
C. Press the + or - Button to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the
next clear station.
D. Press the Preset Button to confirm the setting. A confirmation beep will confirm the setting and the preset number
you wish to assign. Repeat steps A-D to preset up to 6 stations.
4. To listen to a preset station, press the Mode Button to select the desired AM or FM band. Then press the Preset
Button as needed to choose the desired preset.
5. Press the or Button to adjust the system volume. If desired, adjust the EQ as described under Listening to
iPad/iPhone/iPod.
6. To turn off the radio (and the unit), press the Button.
TIP: Download the iHome+Radio app from the App Store to enjoy thousands of internet radio stations from around the
globe on your iD84.
Using the Aux-in Jack
You can play any portable audio device with a standard 3.5 mm headphone jack through the iD84 via the Line-in Jack.
1. Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your device and the
other end of the patch cord into the iD84 Aux-in Jack located on the back of the unit.
2. Press the Mode Button until “Aux-in” appears in the lower part of the display.
3. Turn on and play your device.
4. Press the or Button to adjust the system volume. You may need to adjust the volume on your external device as
well.
5. Press the EQ Button as needed to select Treble, Bass, Balance or 3D Sound, then press the + or - Button to adjust
settings.
6. To turn off the unit, press the Button. Please remember to turn off your device, too.
Sleep Operation
Sleep mode lets you sleep to your iPhone/Pod or radio, gradually lowering the volume until the unit shuts off at the selected
time.
1. Press the Bedtime Button to enter sleep mode. The sleep time will show in the lower display.
2. Press the Bedtime Button again as needed to adjust the sleep timer from 120, 90, 60, 30, 15 minutes or OFF.
3. When the display changes back to show the real time, press the Sleep Button once to show the sleep time remaining.
Pressing it again will change sleep time to next lowest increment.
4. iD84 has an independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the
normal volume. Press the or Button to adjust the sleep volume. The sleep volume will remain at that level the
next time you enter sleep mode until controls are changed.
5. To stop listening at any time, press the Button to turn unit off.