Cornelius J7 TV Cables User Manual


 
FCB Ice Probe Supplemental Harness Installation Instructions
Publication Number: 629088376INS - 2 - © 2003, IMI Cornelius Inc.
5. Disconnect the connector J18 from the Main Control
Board.
6. Using the provided White/Blue Harness, connect
the Male end to the Main Control board at J18 and
the Female end to the Male end of the main unit
harness J18.
7. Replace the screws that hold the control box door closed.
8. Switch the power to the unit on. After the unit runs through the initialization, turn both barrels on.
Verify that the unit starts to refrigerate the barrels by drawing enough product to cycle the blendona-
tor.
Main Board
Connection
J18
Main Unit
Harness J18