Filter
Top Products
9
Insignia NS-CL15C 15" Combo DVD/LCD TV
www.insignia-products.com
Connecting to a VCR or other AV source
To connect your TV to a VCR or other AV
source:
1 Turn off the TV and the VCR (or other
source).
2 Connect an RCA video cable to the VCR (1),
then to the VIDEO IN jack on the back of the
TV (2).
- OR -
Connect an S-Video cable to the VCR, then
to the S-VIDEO jack on the back of the TV.
3 Connect RCA audio cables to the VCR’s
audio output jacks, then to the AUDIO L and
R jacks on the back of the TV.
4 Turn on the TV and the VCR.
5 Set the VCR output switch to channel 3 or 4,
then tune your TV to the same channel.
6 Press the INPUT button to set the TV’s signal
input to AV or S-VIDEO.
Connecting to a cable box
To connect your TV to a cable box with an RF
cable (1):
1 Turn off the TV and the cable box.
2 Connect a 75 ohm RF cable from the cable
box to the ANT IN jack on the back of your
TV.
3 Set the cable box output switch to channel 3
or 4, then tune your TV to the same channel.
4 Turn on the TV and the cable box.
5 Change channels at the cable box or with the
cable box remote.
To connect your TV to a cable box with a AV
cables (2):
1 Turn off the TV and the cable box.
2 Connect RCA video and audio cables from
the cable box to the VIDEO and AUDIO IN
jacks on the back of your TV.
•Yellow - Video
• White - Audio left
• Red - Audio right
3 Turn on the TV and the cable box.
4 Press the INPUT button to set the TV’s signal
input to AV or S-VIDEO.
5 Change channels at the cable box or with the
cable box remote.
1
2
1
2