Filter
Top Products
16
www.insigniaproducts.com
Adjusting the picture
Adjusting the TV picture
To adjust the picture:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed. Press CH or
ENTER to access the Picture menu.
2 Press CH or CH to highlight an option, then
press ENTER or VOL enter the sub-menu. You
can select:
• Mode–Selects the picture mode. You can
select Vivid, Standard, Energy Savings,
Theater, Sports, or Custom. You can also
press PICTURE to select the picture mode.
• Brightness—Adjusts the brightness.
• Contrast—Adjusts the contrast.
• Color—Adjusts the color saturation.
• Tint—Adjusts the picture tone.
• Sharpness—Adjusts the detail enhancement.
Increasing the level, displays cleaner and
clearer images, and decreasing the level
makes the picture smoother
• Advanced Video—For more information, see
“Adjusting Advanced Video settings” on
page 16.
• Reset Picture Settings—Resets all picture
settings to the factory defaults.
Note: You may need to scroll down to see all the
options. When Mode is highlighted, press CH
to return to PICTURE icon at the top.
3 Press VOL or VOL to adjust the option.
4 Press MENU to go to the previous menu or EXIT
to close the menu.
Adjusting Advanced Video settings
To adjust advanced video settings:
1 On the picture menu, press CH or CH to
highlight Advanced Video, then press ENTER
or VOL . The Advanced Video menu opens.
2 Press CH or CH to highlight an option, then
press ENTER or VOL . You can select:
• Aspect Ratio—Selects the aspect ratio. You
can select Normal, Zoom, Wide, Cinema, or
Auto Zoom. Auto Zoom is only available in TV
mode and when Auto Zoom on the Channels
menu is set to On. In VGA mode or in HDMI
mode when a computer is connected to the
HDMI jack, only Wide and Normal are
available.
• Overscan—Turns overscan On or Off.
• Color temperature—Selects the color
temperature to change the overall color of the
picture. You can select Cool, Normal, or
Warm. Select Cool to give the white colors a
blue tint, Normal to give the white colors a
neutral tint, Warm to give the white colors a
red tint.
• Backlight—Controls the overall brilliance of
the screen.
• Noise Reduction—Controls video noise. You
can select Off, Low, Middle, or High.
• Advanced Contrast—Turns Adaptive
Contrast On or Off.
3 Press VOL , VOL , CH , or CH to adjust
the option, then press ENTER to confirm your
setting.
4 Press MENU to go to the previous menu or EXIT
to close the menu.
Adjusting the computer image
To adjust the computer image:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Note
If you adjust Brightness, Contrast, Color, Tint, or
Sharpness, your TV automatically changes the Mode
to Custom.
Custom
40
40
40
R5
+5
PICTURE
Picture
Adjust settings to affect picture quality
AUDIO
CHANNELS
SETTINGS
Mode
Brightness
Sharpness
Contras t
Color
Tint
MOVE
SELECT PREVIOUS EXIT
ENTER
OK
MENU EXIT
Custom
40
40
40
R5
+5
PICTURE
Picture
Adjust settings to affect picture quality
AUDIO
CHANNELS
SETTINGS
Mode
Brightness
Sharpness
Contras t
Color
Tint
MOVE
SELECT PREVIOUS EXIT
ENTER
OK
MENU EXIT