Filter
Top Products
７８
Updating the Firmware
The following describes how to update the firmware of the AVeL Link Player.
* The AVeL Link Player must be able to connect to the Internet.
Powering Up the AVeL Link Player
１
Press the POWER button on the AVeL Link Player.
* It takes several seconds for the AVeL Link Player to
power up.
２
Press the SETUP button on the remote controller, select FW Update, and then press
the ENTER button on the remote controller.
３
Follow the on-screen instructions.
● Never turn off the power while the firmware is being updated. Doing so may cause
damage to the hardware.
POWER button
Press.
Select.
Select.
Point!