Filter
Top Products
Now plug in the SCART Adapter labelled TRANSMITTER.
To re-establish your existing connection plug in your original SCART cable into the back of
the SCART Adapter. Connect the Audio/Video cable from the transmitter to the yellow, red
and white connectors of the SCART Adapter. See the picture for more details. If the jacks are
colored differently, connect the yellow plug on the jack VIDEO, the red plug on the jack AUDIO
RIGHT and the white plug to the jack AUDIO LEFT.
3. Switch the Power slide switch [B] on the side into the "OFF" position
4. Plug the supplied mains adaptor into a wall outlet and connect the plug at the rear side of
the transmitter [E]. Only use the supplied mains adaptor!
5. Switch the Power switch [B] to the ON position.
6. Set the Channel-switch [A] on A.
7. Position the transmitter in a convenient location and orient the antenna [K]
If you have several A/V components:
If you have two or more A/V components (e.g. VCR, Cable box, Laserdisc or satellite receiver)
that you want to watch in another room, they will probably already been hooked up to the
local TV in series. To connect the GigaVideo Transmitter you just need to indentify the last
component in the chain and connect the Line OUT or scart to the GigaVideo Transmitter IN
jacks.
2 SETTING UP THE GIGAVIDEO RECEIVER
1. Connect a set of Audio/Video cables to the LINE OUT jacks [H+I] of your GigaVideo
Receiver.
Connect the other end to your TV. If your TV has a Scart connector, you may use the
Scart adaptor provided; labelled: "Receiver".
2. Switch the Power slide switch [B] on the side into the "OFF" position
3. Plug the supplied mains adaptor into a wall outlet and connect the plug to the backside of
the receiver [E]. Only use the supplied mains adaptor!
4. Switch the Power switch [B] to the ON position.
5. Set the Channel-switch [A] on A.
6. Put the side antenna [J] of the remote control extender in an upright position.
4 MARMITEK
GIGAVIDEO TRANSMITTER
ORIGINAL SCART CABLE TO TV
TO SCART VIDEO
SCART ADAPTER
“TRANSMITTER”
20127_20060803_manual_giga45 17-08-2006 12:24 Pagina 4