Filter
Top Products
12
english
JABRA CRUISER
USING THE FM TRANSMITTER WHEN VOICE ANNOUNCEMENT
FUNCTION IS OFF
If voice announcement function is turned o you can select any of
the pre-programmed frequency channels in the following order:
Chan-
nel No
Pre-pro-
grammed
Frequency
LED indication
(FM Frequency selection mode)
Battery
status
Call
status
Blue-
tooth
status
FM
status
1 88.1 MHz O O On
Flash
2 88.3 MHz O On O
3 88.5 MHz On O O
4 88.7 MHz O On On
5 88.9 MHz On O On
6 89.1 MHz On On O
7 89.3 MHz On On On
To select the desired FM frequency channel, follow these steps:
- Connect your mobile phone and speakerphone.
- Press FM button to enter FM mode. The default frequency
channel is 88.1MHz
- Press the Volume Up or Volume Down button to move to the
next/previous channel.
- Manually turn your radio into the same FM frequency and you
are now ready to transmit calls or music from your phone to
your car stereo.
Note 1: While changing frequencies the FM Status Icon ashes
every 1 second.
Note 2: While changing frequencies, a repeated beep-tone will be
heard and frequencies can be recognized by the combinations of
Status Indicators. (See the table above.)