Filter
Top Products
2
INSTALLATION
Step 1: Take out the antenna main unit.
Step 2: Connect the power inserter to your Set Top
Box (or TV) with the F-Male connector.
Step 3: Take the coaxial cable that attached on the antenna, and connect it to the power inserter.
Step 4: Take out the power adaptor; connect the barrel
end to the DC input of power inserter, AC end to
the AC Outlet. (Please note use only supplied
power adaptor.)
Step 5: Turn on the STB and TV.
Step 6: Adjust the orientation of antenna to get the best signal reception.
If you are going to use the antenna with mounting base, please follow the steps below.
Power Inserter
Digital TV or STB
Digital TV or STB
Power Inserter
Power Adaptor
Power Inserter
Digital TV or STB