Filter
Top Products
8
Programming With Code
Search
If your TV, VCR, DVD.CD player, satel-
lite receiver, or Cable Box does not
respond after you have tried all the
codes for your brand, or if your brand
is not listed, try searching for your
code by following the steps below.
1. Turn on the device
you wish to program.
2. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
3. Press and release the
device button for the
device you are
programming. The
INDICATOR LIGHT
will blink once then
remain lit.
4. Press and release
ON•OFF until your
device turns off.
Important: You may
have to press ON•OFF
up to 200 times.
5. When your device
turns off, press the
ENTER button, the
INDICATOR LIGHT
will go off.