Filter
Top Products
6
Programming VCR or DVD Player Using
Code Lists (con’t.)
The following buttons stand
for each digit of the code:
5. Enter the first digit in the
code with the REV button.
Example: if the first number
is 3, depress the REV button
three times. If the number is
0, do not press REV and pro-
ceed to next step.
Note: The Indicator Light
will blink after each number
is entered.
6. Enter the second digit in the
code with the PLAY button
the same way as in step 5. If
the number is 0, do not
press PLAY and proceed to
next step.
7. Enter the third digit in the
code with the FOR button
the same way as in step 5.
If the number is 0, do not
press FOR and proceed to
next step.
8. Press STOP after code is
entered and the Indicator
Light will turn off.
1st Digit 2nd Digit 3rd Digit
1
ST
CODE
NUMBER
X
2
ND
CODE
NUMBER
X
3
RD
CODE
NUMBER
X
94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 7