Filter
Top Products
Trouble shooting
Maintenance and Service
In case a problem occurs with your LCD TV please take the following steps first
If you still have the problem turn the power off and contact your dealer or an authorized service center
Problem Action
The screen does not appear
Is the power plug connected Insert the power plug
Press the power button of the remote control
The screen appears too
This problem occurs for a brief time in the process of
slowly after the power is turned on
image elimination processing in order to hide temporary screen noise
that occurs when the power is turned on But if the screen does not
come after 1 minute contact your dealer or an authorized service
center
Screen is too bright or too dark Perform brightness ad ustment or Contrast ad ustment
Screen is too large or too small Adust the screen size
Stripes appear on the screen
Stop using wireless telephones hair dryers and electric drills
and it shakes
The screen does not move Press the PAUSE button Check if the Pause button is pressed on
external e uipment
Screen appears Voice is not heard
1 Press the MUTE button
2 Increase the sound level by pressing volume ad ustment button
3 Check if sound terminal of external input is connected properly
4 Check if audio cables are connected properly
5 Select and check the other input
If the sound still does not work and the other channels are the
same after you have done as the above contact your dealer or
an authorized service center
Remote control does not work
1 Check if main power is On
2 Check that the batteries of the remote controller were loaded
properly
3 Check to see if any obstacle exists between the LCD TV and
the remote control then remove it if any
4 If the batteries are low replace them with two new
batteries
31