JVC 0300-T-CR-JMUK CRT Television User Manual


 
57
FEATURES
5
Press the blue button and set the CHILD
LOCK function.
@
(CHILD LOCK) appears and the TV channel is locked.
To reset the CHILD LOCK function:
Press the blue button again.
@
(CHILD LOCK) disappears.
6
Press the
3
button to complete the set-
ting.
The menu disappears.
Note:
To disable easy resetting of the CHILD LOCK func-
tion, the menu disappears by choosing the CHILD
LOCK function and pressing the
3
button as in the
ordinary menu operation.
7R#YLHZ#D#ORFNHG#79#FKDQQHO
7R#YLHZ#D#ORFNHG#79#FKDQQHO7R#YLHZ#D#ORFNHG#79#FKDQQHO
7R#YLHZ#D#ORFNHG#79#FKDQQHO
1
Choose a Programme number (PR) in
which a TV channel locked with the
Number buttons or PR LIST.
The screen changes to blue and the
@
(CHILD LOCK)
appears. You cannot view the TV channel.
2
Press the
9
(Information) button to
display “ID NO.” (ID No. input screen).
3
Press the Number buttons to enter the ID
number.
The lock is temporarily released so you can view the TV
channel.
If you have forgotten the ID number:
Perform step 1 of “To set the CHILD LOCK function”. Af-
ter confirming the ID number, press the
4
button to exit
the menu.
Note:
Even if you reset the lock temporarily, it does not
mean that the CHILD LOCK function set for the TV
channel is cancelled. The next time anyone at-
tempts to view the TV channel, it will be locked
again.
When you would like to cancel the CHILD LOCK
function, you must perform the operation “To set the
CHILD LOCK function” again.
To disable easy choosing of a Programme number
(PR) in which a locked TV channel has been regis-
tered, the Programme number (PR) has been set
that it cannot be chosen by the
ë
buttons or the
operation buttons at the TV.
To disable easy resetting of the lock, “ID NO.” (ID
No. input screen) is set so that it cannot appear un-
less you press the
9
(Information) button.
'(&2'(5#+(;705,
'(&2'(5#+(;705,'(&2'(5#+(;705,
'(&2'(5#+(;705,
Only when connecting a Decoder with a T-V LINK compatible
VCR connected to the EXT-2 terminal, you can use this func-
tion. To operate this function, see “Using the DECODER
(EXT-2) function” on page 30.
Caution:
If you have not connected
a Decoder with a T-V LINK com-
patible VCR connected to the EXT-2 terminal,
setting this
function to “ON” by mistake causes the picture/sound of a
TV channel you are currently viewing not to be issued.
WFT1EI_E2.fm Page 24 Wednesday, March 8, 2000 1:42 PM