JVC 0710GLT-NF-MT Flat Panel Television User Manual


  Open as PDF
of 2
 
No use "Clear SD" Use "Clear SD"
466)$%/
OK
1. Select
2. Set
OK
1. Select a
channel
(Blue)
0
O K
O K
O K
OK
Picture
Picture Mode
Select the picture as you like. (Standard / Soft / Bright)
Backlight Darker <--> Brighter
Picture Lower <--> Higher
Brightness Darker <--> Brighter
Detail Softer <--> Sharper
Color Lighter <--> Deeper
Tint Reddish <--> Greenish *Only NTSC
White Balance
Select the white balance of the picture. (Cool / Mid / Warm)
Features Finer picture adjustment
Clear SD
For clearly picture (Off / Mode-1 / Mode-2)
Digital VNR Reduces the amount of noise in original
picture. (Off / On)
Color Management
For natural - looking pictures. (Off / On)
Picture Management
Fix bright / dark pictures. (Off / On)
Dynamic Backlight
Reduces the brightness of the backlight
when the screen is dark. (Off / On)
Color System Select an appropriate color system.
(Auto / NTSC 3.58 / PAL-M / PAL-N)
Zoom Change the aspect ratio.
(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)
Troubleshooting
Severe noise or snow
Check the aerial cable and TV connections .
Check the direction of the aerial.
Check the aerial or its cable damaged or not.
Patterns, stripes or noise
Interference caused by devices such as an amplier, personal computer,
or a hair drier, Move it away from TV.
Ghosting (Doubling of images)
Interference occurs caused by signal reection from mountains or building.
Try to adjust the aerial’s direction or use another antenna.
Cannot turn it on
Ensure the power cord is connected to the AC outlet correctly.
Cannot operate the remote control.
The batteries may be exhausted. Replace with new batteries.
Ensure that you are operation the remote control at less than 7 meters
from the front of your TV.
Remote control stops working
Unplug TV, several minutes later plug it in again.
Side control buttons do not work
Switch “Child Lock” to “Off”.
Aspect ratio changed unintentionally
Press “
ZOOM
” button to return to your settings.
PC screen alignment is off
Adjust the “PC Position” in “PC Setting” of Set Up menu.
Blue screen appears on the screen
Switch “Blue Back” to “Off”.
Strange picture when using an external device
If the top of the image is distorted, check the video signal quality itself.
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the output setting of
the external device to 625i (interlace-scanning).
Viewing Teletext
You can watch the Teletext broadcast channel with Text Functions.
1 TV mode <--> TEXT mode
2 Select a Teletext page by press number button (0-9).
Move up or down a page by CHANNEL +/-. •
Terminals / ConnectorsMain unit
Broadcasting systems
Area-1 B / G / I / D / K / M / N
Area-2 M / N
Color systems
Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43 /
PAL-M / PAL-N
Area-2 NTSC 3.58 / PAL-M / PAL-N
Channels and
frequencies
Area-1
VHF low channel (VL) = 46.25 to 140.25 MHz
VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
Area-2
VHF low channel (VL) = 55.25 to 127.25 MHz
VHF high channel (VH) = 133.25 to 361.25 MHz
UHF channel (U) = 367.25 to 801.25 MHz
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41)
Sound-multiplex
systems
NICAM (I / B / G / D / K ), A2 (B / G / D / K)
MTS (Multi-channel Television Sound)
Teletext systems FLOF (Fastext), WST (World System Teletext)
Power requirements AC 110 V - 240 V, 50/60Hz
Audio output
(Rated power output)
6 W + 6 W
Speakers (4 cm x 16 cm) x 2
Power consumption
[standby]
[“Rocket Start” mode
standby]
105 W
[0.7 W]
[16 W]
Screen size
(visible area size
measured diagonally)
80 cm
Dimensions
(W x H x D: mm)
[without stand]
791.8 x 571.7 x 203.5
[791.8 x 520.5 x 103.9]
Weights
[without stand]
15 kg
[12 kg]
Accessories
Power cord x 1
Remote control unit : RM-C2022 x 1
AAA/R03 dry cell battery x 2
Screw x 8
Matching box x 1
Specication
What is “Clear SD”
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear SD
mode resolves disadvantage for better picture quality.
Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
INPUT VIDEO-2.
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.
Technical information
Watching Video or DVDs
Sound and Color system in your country or region
Area Country or Region
System System
Asia,
Middle
East
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore, Thailand,
India, etc.
B/G
PAL
China, Vietnam, etc. D/K
Hong Kong, etc. I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM
Philippines, Taiwan, Myanmar, etc. M NTSC
Europe
Russia, etc.
D/K
SECAM
Czech Republic, Poland, etc.
PALGermany, Holland, Belgium, etc. B/G
UK, etc. I
Oceania
Australia, New Zealand, etc. B/G PAL
Africa
Republic of South Africa, etc. I
PAL
Nigeria, etc.
B/G
Egypt, Morocco, etc. SECAM
South
America
Agentina, Paraguay, Uruguay
N
PAL
Brazil
M
Chile, Peru, Bolivia, Colombia, Venezuela,
Ecuador, etc.
M NTSC
1 Select the input source.
HDMI Analog / DVI Analog / PC Audio use terminal common with •
VIDEO-2.
We may change the design and specications without notice.•
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are •
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Terminal name Terminal type Signal type (IN)
Input
terminals
VIDEO-1
RCA connectors x 3
Composite video, Audio L/R
VIDEO-2
RCA connectors x 5
Composite video, Analogue
component 480i (525i) / 576i (625i),
Progressive : 480p (525p) / 576p
(625p),
HD : 720p (750p) / 1080i (1125i) /
1080p (1125p)
Audio L/R
HDMI
HDMI connector x 1
HDMI 480i (525i) / 480p (525p) /
576i (625i) / 576p (625p) / 720p
(750p) / 1080i (1125i) / 1080p
(1125p)
PC INPUT
D-SUB (15 pins) x 1
Analogue PC signal
HDMI Analog /
DVI Analog / PC
Audio
RCA connectors x 2
Audio L / R
Microphone
mini-jack x 1
(3.5 mm in
diameter)
Microphone input
Operate the connected device and play video.•
2 Select “Set Up” Menu.
Poor picture quality
Unnatural color >> Adjust “Color” and “Backlight”.
Check “Color System”. If “Auto” is selected.
Select the specic color system manually.
Poor sound
Adjust the “Bass” and “Treble”.
If receiving a poor signal in “Stereo/I
■
II” switch to “Mono”.
Adjust the channel reception using “Manual”.
ForHDMIsignal,wrongscreensize.
Switch “Size” in “HDMI Setting” to “1” or “2”.
For HDMI signal, green and distorted screen
Wait a little for the signal to stabilize when switching the signal format for
an “HDMI” device.
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or
“Analogue” or “Auto” for DVI devices.
Some functions do not work.
It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.
Black or white dots appear on the screen.
LCD panels use ne dots (“pixels”) to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
No picture, No sound
Some input do not output from OUTPUT terminal.
Subwoofer, No sound
May be signal source is not low frequency bass signal.
Check subwoofer cable connected correctly.
Feedback sound symptoms
Keep the microphone away from the TV’s speakers.
Echo
Lower the sound level in “Microphone Volume” in order to prevent the echo.
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Connect “DVI” devices
Using the TV’s Menu ---> Area - 2
Useful functions
Useful functions (continued)
No use “Clear SD” Use “Clear SD”
Set Up
Auto Program Automatically registers channels.
Channel
Summary
Skip
Skip the channel by
(Red)
.
Cancel
Cancel the skip channel by
(Green)
.
ID
Edit a channel name by
(Yellow)
.
Channels are to be skipped cannot be selected by •
the CHANNEL - / + button.
The skip can be set to all channels of Air (CH02 - •
CH69) and Cable (CC01 - CC125).
Language Select your desired on screen display language.
Video-2 Setting
Switch between video and component signal.
(Video / Component)
Rocket Start TV can turn on quickly. (Off / On)
When Rocket Start is On, power consumption at •
standby mode will more than normal standby mode.
Closed Caption
Select the desired caption or text channel.
Closed
Caption
Select to view close caption or text
information. (Off / CC / Text)
Caption Select the desired caption.
(CC1 / CC2 / CC3 / CC4)
Text Select the desired text channel.
(T1 / T2 / T3 / T4)
Closed Caption is not available for component •
signal.
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting Setting for PC input.
(Auto / PC Position / Phase / Pixel)
Sound
MTS Select the stereo and SAP broadcasted programs.
(Stereo / SAP / Mono)
Sound Meister Set sound theme to match your listening source.
(Off / Dynamic / Pure / Living)
Bass
Compensates low frequencies to widen the
frequency band. (Weaker <--> Stronger)
Treble
Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)
Surround Expands the stereo sound naturally.
(Narrower <--> Wider)
Balance Left Stronger <--> Right Stronger
Voice Enhancer
Uses sound enhancement technology. (Off / On)
Al Volume
Prevent sudden increase or decrease of sound. (Off / On)
Subwoofer Out
Chooses to connect subwoofer. (Off / On)
Subwoofer Level
Adjusts sound level of your subwoofer.
(Lower <--> Louder)
When Subwoofer Out set to On, you can adjust •
Subwoofer Level.
Karaoke
You can enjoy to reduce the vocals for your own karaoke.
Karaoke Chooses to reduce the vocals.
(Off / Mode-1 / Mode-2)
Main Volume
Adjusts volume level. (Lower <--> Louder)
Microphone Volume
Adjusts volume level of microphone.
(Lower <--> Louder)
Features
On Timer Turns on the TV from standby mode.
CH Select a channel. (Air : CH02 - CH69 ,
Cable : CC01 - CC125)
On Timer Set a time. (00:00 - 12:00)
Sleep Timer
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Channel Guard
Stop children from watching specic channels.
Blue Back Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Child Lock Disables the side control buttons of the TV. (Off / On)
Auto Shutoff Set the power to turn off if no TV signal (RF) is
received and no operation is performed for about 15
minutes. (Off / On)
Favorite Setting
Delete the favorite channel that you registered by
(Blue)
.
Power Lamp Sets power lamp lighting while the TV is on. (Off / On)
Eco Mode Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2 / Max-Eco)
654
Language group for Teletext
Group Languages
Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Greek, Swedish, Finnish
Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,
German, French
Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,
Serbian, Croatian, Slovenian, Czech, Slovak, English, German
Group-4 Arabic, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
Group-5 Farsi, Hungarian, English, German, French, Italian, Swedish,
Finnish
PC Signals that can be displayed
If the signal doesn’t appear, check that the vertical frequency on the PC is •
set to “60Hz”.
Resolution 640 x 480 (VGA) / 1024 x 768 (XGA)
Vertical frequency 60.0
* Machintosh* computers are not supported.
(Machintosh is a registered trademark of Apple Computer, Inc.)
If the characters are unreadable. • ➡ Select different Teletext language
group.
List Mode : Book mark your favorite page.
MODE
for select to save
Press number button
for enter the number
of page.
save
(Red) (Green) (Yellow) (Blue)
• Recall your favorite page by press the color button.
Hold : Hold the current page.
• Cancel by press this button again.
Reveal : Display hidden information.
• Example : answer to a quiz, etc
Size : Double the size of the displayed text.
Index : Returns to page “100” or a previously designated page.
Cancel :
Leave the current page open, while you switch to watch TV.
• Useful when running a page search.
Sub-page : Display the number of Sub-page.
• Cancel by press this button again.
HDMI setting : Setting for HDMI input.
Size : Auto / 1 / 2
If wrong screen size appears in 480p (525p),
change to “1” or “2”.
Audio : Auto / Digital / Analogue
If no sound, change to “ Analogue “ or “ Digital”.
PC Setting : Setting for PC input.
Auto :
Automatic adjust by 2.
PC Position :
Adjust screen position by 3 / 4.
And set by
OK
.
Phase : Sets the focus of screen.
Pixel : Adjusts the horizontal feature of screen.
Channel Guard :
Stop children from watching specic channels.
1 Select “Channel Guard”
Subwoofer out :
You can enjoy subwoofer sound from Subwoofer out.
1 Select “Subwoofer Out”
Freeze:
Take snapshots of the screen.
1
Karaoke :
You can enjoy to reduce the vocals for your own karaoke.
1 Select “Karaoke”
2 Select a channel and lock it ( : locked)
View a locked channel by use the numerical buttons to enter the channel •
number. When appeare, press “Display” button and enter your “ID No.”
Chooses to connect subwoofer. (Off / On)
When Subwoofer Out set to On, you can adjust Subwoofer Level.•
Subwoofer to be used must have a built-in amplier.•
You cannot save or export the snapshot.•
Freeze function is not available for HDMI, PC and Component signal.•
still picture
Main Volume Adjusts volume level. (Lower <---> Louder)
Microphone Volume Adjusts volume level of microphone.
(Lower <---> Louder)
Microphone Volume is available when plug in microphone.•
Microphone to be used with the “• Karaoke” function of JVC must
be of “HIGH GRADE LOW NOISE MICROPHONE CABLE” type;
otherwise, noise will result.
Lock / Release
1. Select a number
1. Select
1. Select
2. To the next column
2. Adjust
2. Adjust
3. Set
3. Finish
3. Finish
Cancel
Press “
OK
” again,
or change the
channel.
* Please see CH/CC List in GGT0356-001A-H.
Eco Mode : Adjusts picture contrast according to the brightness of your room to reduce power consumption.
Off : Deactivates the function
Eco-1 : Picture is darkened for the 1st level.
Eco-2 : Picture is darkened for the 2nd level (more than the 1st level).
Max-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house
works at the same time).
- After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.
- When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.
- After unplugging the TV or press “Power off” button, this function will be reset back to “Off”
Karaoke
Chooses to reduce the vocals.
Off : Normal sound of song
Mode-1 : Only sound of music
Mode-2 : To sing, accompanying with sound of song
Karaoke function works only for stereo sound system.•
If using Karaoke disc, users must choose to remove the •
vocals from the player.
AV Select
0 01
1 Video-1
2 Video-2
3 HDMI
4 PC
> Set ID No.
Features
0 0 0 0
>> Channel Guard
PR
01
02
03
04
05
06
07
08
09
10
CH / CC
CH 02
CH 05
CH 47
CH 09
CH 11
CH 07
ID
SAT
– – – – – –
BBC
IEEE
APL
DANY
Features
Karaoke
Main Volume
Microphone Volume
Karaoke
Off
Sound
Freeze
Sound
Stereo / III I II Mono
Sound Meister
Balance
Voice Enhancer
Off
AI Volume
Off
Subwoofer Out On
Subwoofer Level
Karaoke
 previous