Filter
Top Products
ENGLISH - 7 -
Install. Menu
Press MENU button, now you are in main menu. In the
main menu, select INSTALL. using
or button,
then enter the Installation menu pressing
or button.
or
Enter the Installation Menu directly, pressing the BLUE but-
ton.
To programme a channel in a TVs programme
number manually:
1. PROGRAMME will be the first selected item as you enter
the INSTALL. menu. Pressing
or button select the
programme number where you want to the tuned channel
to be stored. (You may also type the programme number
using the digit buttons.)
2. Press or button to select BAND. Using or
button to select the band in which you want to search a
channel.
3. Press
or button to select SEARCH. Press
or
button to start searching. (Press button to search
forward.Press
button to search backwards.)
If the found channel is not the desired one, press
or
button to start searching again.
To stop searching before a channel is found, press the re-
verse direction button. For example, when the TV is search-
ing forward with
button, press button to stop searching.
If you know the channel number which you want to find, you
can find the channel directly.
Press
or button to select CHANNEL, then press
or button to select the channel number, or enter the
number with the digit buttons.
4. If you want to name the new programme, follow the instruc-
tions under "To change the name of a programme" on
page 7.
5. If the channel reception is poor, fine-tune the channel.
Press
or button to select FINE TUNING,then
press
or to fine-tune the channel.
6. After the all settings are completed, store the new
channels setting to the programme number which you se-
lected. Press
or button to select STORE,
then press
or to store it.
If you want to modify the current programme numbers
setting (for example, changing fine tuning, etc.) :
1. Select the programme number you want to modify the
settings while no menu appears.
2. Display the INSTALL. menu.
3. Follow To programme a channel in a TVs program-
me number manually: on page 7 and change the set-
tings of the current programme number.
If you want to name the new programme, follow the in-
structions under "To change the name of a programme"
on page 7.
Note:
Do not use Programme item in the INSTALL. menu to select
the programme number. If you select the programme number
with Programme item and store the settings, the selected
programme numbers current settings are cancelled.
Program. (Programming) Menu
PROGRAM. (Programming) menu is used to display the
programme names and numbers. You can use this menu to
delete a channel, to insert a channel and to autostore the
programmes.
Select the PROGRAM. menu pressing
or but-
ton and open it pressing
or button. When you enter the
programme menu, all the programme numbers and names
will be displayed on the screen. The programme number and
name of the tuned channel will be shown by the cyan color.
All the other channel numbers will be white. You can move
the number in cyan using
or or or button.
Also, it's possible to use digit buttons to select programme
numbers. As you pass through the programme numbers this
way, to reach the programme number you want, the channels
corresponding to the programme numbers you pass through
will be tuned and the selected programme number will be
shown in cyan.
To change the name of a programme:
Move to the channel you want to rename or use the digits
so that the selected programme number is in cyan color.
Press the RED button. Use
or button to select the
position and press
or button to select a letter.
Now, press the RED button again to store or BLUE button to
cancel NAME.
To delete a channel from a programme number:
Move to the channel you want to delete or use the digits so
that the selected programme number is in cyan color.
Press the YELLOW button. Now the corresponding channel
will be deleted and all the other channels below this pro-
gramme number will be moved one programme number up.
01-ENG&BG-AK36-AV-14RM4SN-50050690.p65 21.07.2004, 16:177