JVC AV-14F3 CRT Television User Manual


 
No. 52026
A
V-14F3/AV-1435
A
V-1435EE/AV-1435TEE
A
V-14FMT3/AV-1438
A
V-14FMG3/AV-14FMG3
B
23
Item
Measuring
instrument
Test point Adjustment part Description
Ad just ment
of
SUB BRIGHT
Remote
control unit
3. BRIG HT 1. Receive any broadcast.
2. Enter the SERVICE MENU.
3. Select 2. V/C from SERVICE MENU.
4. Select 3. BRIGHT with the MENU /key.
5. Set the initial setting value with the MENU - / + key.
6. If the brightness is not the best with the initial set value, make
fine adjustment until you get the best brightness.
Ad just ment
of
SUB CONT.
Remote
control unit
4. CONT . 1. Receive any broadcast.
2. Enter the SERVICE MENU.
3. Select 2. V/C from SERVICE MENU.
4. Select 4. CONT. with the MENU /key.
5. Set the initial setting value with the MENU - / + key.
6. If the contrast is not the best with the initial set value, make fine
adjustment until you get the best contrast.
5. COLOUR [Method of adjustment without measuring instrument]
PAL COLOUR
1. Receive a PAL broadc ast.
2. Enter the SERVICE MENU.
3. Select 2. V/C from the SERVICE MENU.
4. Select 5. COLOUR with the MENU / key.
5. Set the initial settin
g
value for PAL COLOUR with the MENU
- / + key.
6. If the colour is not the best with the initial set value, mak e fine
adjustment until you get the best colour.
SECAM COLOUR
1. Receive a SECAM broadcast.
2. Make fine adjustment of SECAM COLOUR as previously.
NTSC 3.58 COLOUR
1. Receive a NTSC 3.58MHz broadcast.
2. Make similar fine adjustment of NTSC 3.58 COLOUR as
previously.
Ad just ment
of
SUB
COLOUR
Remote
control unit
NTSC 4.43 COLOUR
When NTSC 3.58 adjustment completed, NTSC 4.43 will be
automatically set at the respective values.