JVC AV-16N214 CRT Television User Manual


 
17
To register the TV channels automatically
You can register the TV channels into the TVs channel list
automatically.
1 Display the INSTALL menu.
2 Choose AUTO PROGRAM, then press the MENU/OK button.
AUTO PROGRAM function starts, and the channels received
are registered in the channel list (PR list) automatically.
3 SETUP TOUR RESTART? appears.
To start the SETUP Press the MENU/OK button. Then proceed to
TOUR step 5 of Setting up your TV on page 8.
To skip the SETUP Press the Red button.
TOUR
4 The EDIT menu appears.
To edit the channel Proceed to the Step 3 of To edit the channel
list list (PR LIST) on page 18.
If a channel is not Proceed to the Step 3 of To register the
registered TV channels manually on this page.
To exit the menu Press the MENU/OK button.
For details of SETUP TOUR, see page 8.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TVs channel list manually.
1 Display the INSTALL menu.
TV channel presetting
2 Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
3 Choose the channel which you want to register.
4 Press the blue button to activate the MANUAL function.
The sound system of the channel appears at the right of the
CH/CC number.
5 Press the 3 button to choose an appropriate sound system.
For details, see SOUND SYSTEM on page 12.
6 Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
7 Repeat step 5 until your desired TV channel appears
If the reception is poor Press the blue or yellow button to fine tune
the TV channel.
If noisy sound is heard Press the 3 button to choose an appropriate
sound system.
8 Press the MENU/OK button to exit the menu.
About the basic operations of the menu, please see the How
to operate menus and menus locations on page 5.
EDIT
BACK
INSERT
OK
MOVE
DELETE
MANUAL
PR CH/CC
7 CH 09
8 CH 11
9 CH 13
3
10
11
12
13
.
MENU
INSTALL menu
MENU
INSTALL menu
GGT0051-001D-E(11-20) 11/8/04, 2:08 PM17