Filter
Top Products
5
Preparation
4 SETUP TOUR
When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo
is displayed. Follow the instructions on the on-screen display to perform the SETUP
TOUR.
• In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET
function on the “MENU 3” menu. For details, see page 13.
1 Press the Main power button
on the TV.
The POWER lamp lights. After the
JVC logo has been displayed, the
TV automatically switches to the
language setting mode.
SETUP TOUR
2 Press the MENU M buttons
to select the on-screen
language.
SETUP TOUR
LANGUAGE
ENGLISH
NEXT
EXIT BY
OPERATE BY -+
DISPLAY
3 Press the MENU y button.
The AUTO PROGRAMMING
function will start and the
indicator blinks.
STOP BY
-+
SETUP TOUR
NOW PROGRAMMING
•To stop the AUTO PROGRAMMING
function, press the MENU m
buttons.
When all the TV channels that can
be received on your TV have been
preset, the display goes out and the
AUTO PROGRAMMING function
operation is completed.
• If a TV channel you want to view is not
set to the channel, set it with the
MANUAL CH PRESET function. For
details, see page 14.
4 Upon the completion of AUTO
PROGRAMMING function, the
message below is displayed.
SETUP TOUR
THANK YOU!
ON TIMER POWER
RETURN
+
0
-
/
--
CHANNEL
SCAN
DISPLAY
MENU
VOLUME
MUTING
DISPLAY
button
MENU /
buttons
MENU –/+
buttons
CHANNEL
POWER lamp Main power button
GGT0009-21W111-E604 01/01/2032, 00:11am5