Filter
Top Products
32
Further preparation
AV28CT1EK/EI / LCT1138-001A-U / English
Equipment which can output the
Equipment which can output the Equipment which can output the
Equipment which can output the
S-VIDEO signal (Y/C signal) such as
S-VIDEO signal (Y/C signal) such asS-VIDEO signal (Y/C signal) such as
S-VIDEO signal (Y/C signal) such as
an S-VHS VCR
an S-VHS VCRan S-VHS VCR
an S-VHS VCR
Connect the equipment to an EXT terminal (but not the
EXT-1 terminal).
You can choose between an S-VIDEO signal (Y/C signal) and
a regular video signal (composite signal). For details of how
to operate the equipment, see “y (S-VIDEO input)” on
page 21.
T-V LINK compatible VCR
T-V LINK compatible VCRT-V LINK compatible VCR
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible VCR to the
EXT-2 terminal. If not, the T-V LINK function will not work
properly.
•
When connecting a T-V LINK compatible VCR to the
EXT-2 terminal, be sure to connect the decoder to the
VCR. If not, the T-V LINK function may not work properly.
After you have stored TV channels in the programme
numbers (PR) list, set the DECODER (EXT-2) function for
the programme number (PR) to ON to unscramble a
scrambled TV channel. For details, see “Using the
DECODER (EXT-2) function” on page 30.
Connecting headphones
Connecting headphonesConnecting headphones
Connecting headphones
Connect the headphones with a stereo mini-jack (3.5mm
diameter) to the headphone jack at the TV front panel.
•
When you connect the headphones, the TV speakers go
off.
Video or sound signal output from
Video or sound signal output fromVideo or sound signal output from
Video or sound signal output from
the EXT-2 terminal
the EXT-2 terminalthe EXT-2 terminal
the EXT-2 terminal
You can change over the output of the video/sound signal
from the EXT-2 terminal. This is useful when you want to dub
the video/sound from another device onto the VCR connected
to the EXT-2 terminal. For details on how to do this, see
“DUBBING” on page 22.
TV output from the EXT-1 terminal
TV output from the EXT-1 terminalTV output from the EXT-1 terminal
TV output from the EXT-1 terminal
The video/sound signal of a TV channel you are viewing is
always output from the EXT-1 terminal.
•
Changing over a programme number (PR) also changes
over the TV output from the EXT-1 terminal.
•
The video/sound signal from an EXT terminal cannot be
output.
•
Teletext programmes cannot be output.
AV28CT1EKEI.book Page 32 Tuesday, December 18, 2001 10:20 AM