Filter
Top Products
ENGLISH - 25 -
In an AV mode, you can change only the MODE or CO-
LOUR SYSTEM setting.
If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on the screen.
Press
or button to select TUNING item.
Press
or button to enter TUNING menu.
1. Press or to select an item in the TUNING
menu. Then press
or button to change the setting.
2. After all settings of a channel are completed, press
or
button to select Programme item. Then press
or button to select a programme number which you
want to store the setting.
3. Press or button to select Store item. Then
press
or button to store the setting.
The "STORED" appears at the bottom of the menu for 3
seconds. Then T-V LINK menu appears.
4. If you do not have a T-V LINK compatible VCR, press
PICTURE button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, follow the operating procedure Down-
loading the data to VCR on page 21 to transmit the
Programme table data to the VCR.
Search:
You can search a channel manually.
Select "Search" item. Then press
or button to start
searching. "SEARCHING" is displayed while the TV is
searching a channel.
Searching stops when the TV finds a channel. Then the
channel is displayed.
Press
or button repeatedly until the channel you want
appears.
When you cannot search a channel you want, select the
"Standard" item and select other broadcasting system.
Then start searching again.
Standard:
If you cannot hear the normal sound even when the picture
appears normally, select the correct broadcasting system to
hear the sound normally.
Select "Standard" item. Then press
or button to se-
lect a broadcasting system.
Colour system:
If the picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
Select "Colour system" item. Then press
or button
to select a colour system.
Band, Channel:
If you know a channel number, you can find it directly by
entering the channel number.
Select the "Band" item. Then press
or button to se-
lect the band (C or S) where the channel you want is lo-
cated.
Select the Channel item. Then press or button to
select the channel number, or enter the channel number
with the digit buttons. The available channel numbers differ
depending on your COUNTRY and Standard settings.
Fine tuning:
If the channel reception is poor, fine-tune the channel.
Select "Fine tuning" item. Then press
or button to
fine -tune the channel.
Name:
You can store the channel name or change it.
Select Name item. Then press
or button to display
a cursor.
Press
or button to select a character and
press
or button to move the cursor.
After the name is completed, press the MENU button.
Mode:
Set "Mode" item to "TV" for the TV channels.
When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the "Mode" set-
ting from "TV" to "VCR".
Decoder (EXT-2):
You can only set Decoder (EXT-2) item to ON if you have
a decoder connected to a T-V LINK compatible VCR, which
02-ENG-2835-AK52-3D-C86SUK-4-3-(AV-28ED5BN&SN)-50064523.p65 20.04.2005, 10:0425