Filter
Top Products
56
FEATURES
5
Press the blue button and set the CHILD
LOCK function.
@
(CHILD LOCK) appears and the TV channel is locked.
To reset the CHILD LOCK function:
Press the blue button again.
@
(CHILD LOCK) disappears.
6
Press the
3
button to complete the
setting.
The menu disappears.
• To disable easy resetting of the CHILD LOCK
function, the menu disappears if you choose the
CHILD LOCK function and press the
3
button.
7R#YLHZ#D#ORFNHG#79#FKDQQHO
7R#YLHZ#D#ORFNHG#79#FKDQQHO7R#YLHZ#D#ORFNHG#79#FKDQQHO
7R#YLHZ#D#ORFNHG#79#FKDQQHO
1
Choose a programme number (PR) for a
locked TV channel, by using the number
buttons or PR LIST
The screen changes to blue and the
@
(CHILD LOCK)
appears. You cannot view the TV channel.
2
Press the
9
(information) button to
display “ID NO.” (ID No. input screen)
3
Press the number buttons to enter the ID
number
The lock is temporarily released so you can view the TV
channel.
If you have forgotten the ID number:
Perform step 1 of “To set the CHILD LOCK function”.
After confirming the ID number, press the
4
button to
exit the menu.
• Even if you reset the lock temporarily, it does not
mean that the CHILD LOCK function set for the TV
channel is cancelled. The next time anyone tries to
view the TV channel, it will be locked again.
• When you want to cancel the CHILD LOCK function,
you must perform the operation “To set the CHILD
LOCK function” again.
• To stop it being easy to choose the programme
number (PR) of a locked TV channel, the
programme number (PR) has been set so that it
cannot be chosen by the
ë
buttons or the buttons
of the TV.
• To stop it being easy to reset of the lock, “ID NO.” (ID
No. input screen) is set so that it cannot appear
unless you press the
9
(Information) button.
■
■■
■ '(&2'(5#+(;705,
'(&2'(5#+(;705,'(&2'(5#+(;705,
'(&2'(5#+(;705,
You can only use this function if you have a decoder
connected to a T-V LINK compatible VCR, which in turn is
connected to the EXT-2 terminal. To use this function, see
“Using the DECODER (EXT-2) function” on page 29.
•If you have not connected a decoder with a T-V LINK
compatible VCR to the EXT-2 terminal, setting this function
to “ON” by mistake causes the picture/sound of a TV
channel you are currently viewing to disapper.
WFT1EK_E2.fm Page 23 Tuesday, December 19, 2000 9:22 AM