Filter
Top Products
58
INSTALL
ENGLISH
,'
,','
,'
1
Press the
ë
ëë
ë
buttons to choose a TV
channel.
Every time you press the
ë
ëë
ë
buttons, the Programme
number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR) ap-
pears on the screen.
2
Press the red button to start the ID func-
tion.
3
Press the
ë
ëë
ë
buttons to choose the first
character of a Channel name (ID) you want
to attach to the TV channel.
4
Press the blue button to display the ID LIST
(channel name list).
5
Press the
ë
ëë
ë
buttons to choose the Chan-
nel name (ID).
To cancel the ID function:
Press the
å
(Information) button.
6
Press the
é
éé
é
button to register a Channel
name (ID) to a TV channel.
Note:
•
You can register your unique Channel name (ID) to
the TV channel. When step 3 is completed, do not
go to step 4, but press the
ì
ìì
ì
buttons to move the
cursor and the
ë
ëë
ë
buttons to choose a character for
completing the Channel name (ID). Then press the
é
button to register the Channel name (ID) to the
TV channel.
,16(57
,16(57,16(57
,16(57
Preparation:
•
A CH/CC number unique to this TV and corresponding to
the Channel number of a TV channel is required. Find the
corresponding CH/CC number from a table “CH/CC
NUMBER” on page 32. based on the Channel number of the
TV channel.
•
When the COUNTRY setting is not FRANCE, use a two-digit
CH/CC number. When the COUNTRY setting is FRANCE,
use a three-digit CH/CC number.
•
Only when you add a TV channel (SECAM-L system) from
a French station, be sure to set COUNTRY to FRANCE. If
the COUNTRY setting is not FRANCE, follow the descrip-
tion “Changing the COUNTRY setting” on page 28 to
change the COUNTRY setting to FRANCE, then start the
INSERT function.
1
Press the
ë
ëë
ë
buttons to choose a Pro-
gramme number (PR) for which you will
register a new TV channel.
2
Press the green button and start the IN-
SERT function.
3
Press the
ë
ëë
ë
buttons to choose “CC” or
“CH” according to the CH/CC number of
the TV channel.
When the COUNTRY setting is FRANCE:
Choose “CH1”, “CH2”, “CC1” or “CC2”.
To cancel the INSERT function:
Press the
å
(Information) button.
4
Press the Number buttons to enter the re-
maining CH/CC number.
The TV shifts to registration mode.
When the registration is completed, the picture of the TV
channel appears on the screen.
Note:
•
The CH/CC number is a number indicating the
broadcast frequency to the TV. If the TV cannot de-
tect the TV channel corresponding to the broadcast
frequency indicated by the CH/CC number, a pic-
ture in the no-signal state appears.
WT5EP_EN.book Page 25 Wednesday, December 27, 2000 4:45 PM