Filter
Top Products
ENGLISH - 8 -
Program. (Programming) Menu
Program. (Programming) menu is used to display the pro-
gramme names and numbers. You can use this menu to de-
lete a channel, to insert a channel and to autostore the pro-
grammes.
Select the PROGRAM. menu pressing or but-
ton and open it pressing or button. When you enter the
programme menu, all the programme numbers and names
will be displayed on the screen. The programme number and
name of the tuned channel will be shown by the red colour.
All the other channel numbers will be black and at first the
programme number 01 will be flashing. You can move the
flashing number using or or or button. As
you pass through the programme numbers this way, to reach
the programme number you want, the channels correspond-
ing to the programme numbers you pass through will not be
tuned.
Pressing the RED button will tune the channel on the flashing
programme number. Now the colour of the flashing program-
me number will be red. Again you can use or or
or button to move the flashing number.
352*5$0
To delete a channel from a programme number:
Move the flashing onto the channel you want to delete.
Press the YELLOW button. Now the corresponding channel
will be deleted and all the other channels below this pro-
gramme number will be moved one programme number up.
To insert a channel into a programme number:
Move the flashing onto the selected channel.
Press the RED button, so that channel will be displayed on
the screen.
Move the flashing onto the selected programme number.
Now pressing the GREEN button will insert the channel on
screen displayed into that programme number. If a channel
is moved to a lower programme number, channels between
the previous and current position of the selected channel will
be moved one programme number up and if a channel is
moved to a upper programme number, channels between
the previous and current position of the selected channel
will be moved one programme number down.
AUTOSTORE
If you enter the AUTOSTORE menu, you can automatically
programme the received channels in your TVs programmes
with APS ( Automatic programme system ).
1. After displaying the PROGRAM. menu, press the BLUE
button to enter the AUTOSTORE menu. The message
ALL PRESTORED PROGRAMMES WILL BE ERASED
will appears.
2. If you want to start programming, press button. The
message A.P.S. IS RUNNING PLEASE WAIT appears
and APS automatically programmes the received channels
in your TVs programme numbers. Afrer APS is finalized,
the PROGRAM. menu appears again.
To cancel APS, press STANDARD button.
TV Config. (Configration) Menu
This menu is used to select the Menu language, the Country
where you are now located and to select the source of EXT 2
OUTPUT.
In the Installation menu, Press or button to se-
lect TV Config. Then press or button to enter the
TV Config. menu.
Selecting Menu Language
In the TV Config. menu select Language and change the
language to the one you desire, using or button. As
soon as you change the language, the menu items will be
displayed in the selected language.
Selecting Country
In the TV Config. menu select Country using or
button. Change the country pressing or button.
Setting External Source Output
You can use this menu to select the internal or external
source that will be output at EXT 2 terminal.
In the TV Config. menu select EXT 2 OUTPUT using
or button. Then select the source you want to
be output at EXT 2 pressing or button (one of the
sources: TV, EXT 1 or F AV (Front AV).