Filter
Top Products
1
6
P L U G I N M E N U
To YES/NO
Choose YES
Proceed to set the clock as in the
previous column.
If you choose NO, you will receive the
following message:
NOTE:
You must have the
clock set to
operate the On/Off
Timer.
SET CLOCK
The Clock is the heart of all timer
functions. The clock must be set
before the timer functions to work.
To SET CLOCK
To operate
To set the hour (AM/PM)
To move to minutes
To set the minutes
To move to START CLOCK
when done with settings
To start the clock
Note: If you attempt to “Start Clock”
without setting the time you will
receive this message:
CLOCK — ON/OFF TIMER
MESSAGE
If you do not set the clock but attempt
to use the On/Off Ti m e r, you will get the
following message:
T I M E ––:–– ––
S TART CLOCK
THANK YOU ! !
POWER INTERRUPTED
WOULD YOU SET CLOCK
F I R S T ?
Y E S
NO
T I M E ––:–– ––
S TART CLOCK
INCORRECT TIME
PLEASE TRY AGA I N
YOU CANNOT OPERAT E
ON/OFF TIMER !
Continued from below…
Continued above…
FINISH
Once you have set up the items in the
Plug In Menu you must select Finish.
To FINISH
To exit
N o t e : You can reset the pre f e rences that
you set here in the Plug In Menu via the
regular JVC Menu system.