Filter
Top Products
SET UP menu
33
AV-32H5SA / LCT1920-001A-H / English
DECODER (EXT-2)
When connecting a Decoder with a T-V
LINK compatible VCR connected to the
EXT-2 terminal, use the DECODER (EXT-
2) function to unscramble the scrambled TV
channels.
1 Turn on the Decoder power
2 Display the TV channel capable of
being unscrambled with the
Decoder on the TV
Even if the Decoder is functioning, a
scrambled picture appears at this time.
3 Press the a button to display the
SET UP menu
The SET UP menu appears.
4 Press the 6 buttons to choose
DECODER (EXT-2). Then press the
5 buttons to choose ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2)
function:
Press the 5 buttons to choose OFF.
5 Press the a button to complete
the setting
The T-V LINK menu appears.
6 Follow the operating procedure
“Downloading the data to VCR” on
page 8 to transmit the Programme
number (PR) data to the VCR
7 If you have another TV channel
capable of being unscrambled with
a Decoder, repeat steps 2 through 7
If for some reason the DECODER (EXT-
2) function has been set to “ON” but the
TV channel cannot be unscrambled, check
the following:
• Has the Decoder been connected to the
VCR properly according to the VCR
and Decoder Instruction Manuals?
• Has the Decoder power been turned
on?
• Can the TV channel be unscrambled
with a Decoder?
• Is it necessary to change the VCR
settings in order to connect the
Decoder? Confirm that the VCR is set
properly by rechecking the VCR
Instruction Manual.
D0029
SET UP
OFF
TV OK
-EN
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)
EXT SETTING
PICTURE TILT
D0005
DOWNLOAD TV RECORDING DEVICE
T-V LINK
TV OK
EXIT
-EN
AV-32H5SA_Eng.book Page 33 Friday, June 24, 2005 4:48 PM