Filter
Top Products
23
$9+6./&7$8(1*/,6+
EXT SETTING
See “Using the TV’s menu” (page 18) for
details of displaying the menu.
S-IN (S-VIDEO input)
You can connect a device (such as an S-VHS
VCR) to enjoy the high-quality picture of the
S-VIDEO signal (Y/C signal).
Preparation:
• First read the device’s instruction manual
and “Additional preparation” on page 35
to connect the device to the TV properly.
Second, follow the device’s instruction
manual to set the device so that it sends an
S-VIDEO signal (Y/C signal) to the TV.
• Do not set S-IN (S-VIDEO input) to an
EXT terminal connected to a device
which cannot output an S-VIDEO (Y/C
signal). If it is set wrongly, a picture
cannot appear.
1 Choose an EXT terminal
2 Press the yellow button and set the
S-IN (S-VIDEO input).
Then press the a button
An S-IN (S-VIDEO input) mark is
displayed. You can view an S-VIDEO
signal (Y/C signal) instead of the regular
video signal (composite signal).
To cancel the S-IN (S-VIDEO input)
setting:
Press the yellow button and turn off S-IN
(S-VIDEO input) mark. The regular video
signal (composite signal) pictures are
resumed.
• The EXT-1 terminal does not support
S-VIDEO signal (Y/C signal) and you
cannot set S-IN (S-VIDEO input) in
the EXT-1 terminal.
• Setting S-IN (S-VIDEO input)
changes the head character from “E” to
“S”. When an EXT terminal receives a
normal video signal, “E1”, “E2”, “E3”
or “E4” appears on the display. This
changes to “S2”, “S3” or “S4” when it
receives an S-VIDEO signal.
• Even a device which can output an S-
VIDEO signal (Y/C signal) may
output a regular video signal
(composite signal) depending on the
device setting. If a picture cannot
appear because the S-IN (S-VIDEO
input) setting has been made, read the
device instruction manual carefully
again to check for the device settings.
LIST
You can store a name for each of the devices
connected to each EXT terminal. Giving a
name to an EXT terminal makes the EXT
terminal number appear on the screen,
together with its name.
1 Choose an EXT terminal
2 Press the blue button to display the
name list (ID LIST)
3 Press the 6 buttons to choose a
name. Then press the a button
The ID LIST disappears and the name is
assigned to the EXT terminal.
• You cannot choose an EXT terminal
name that is not on the name list (ID
LIST).
AV-32H77SK.book Page 23 Friday, January 9, 2004 9:44 AM