JVC AV-14ATG2 CRT Television User Manual


 
7
Preparation
Manual Channel Preset
You can manually preset the desired TV channels to the desired channels.
1.
Press MENU
/
to display the
MENU 3
menu,
then select
MANUAL CH PRESET
.
2.
Press MENU /+.
The sub-menu is displayed.
The channel No. is displayed as a PR No.
3.
Press MENU /+ to select the channel
number.
4.
Press VOLUME /+ to start searching for
the TV channel.
or is displayed on the screen.
When a TV channel is received, the
or display goes out, and the TV
station is preset to the currently selected channel No.
If the TV channel you want to preset is not displayed, repeat step 4 until the TV finds the
TV channel you want to preset.
To stop the Manual Channel Preset function, press any button other than the VOLUME
/+ button.
If the picture is not clear:
Use the Fine function to fine-tune the TV station.
1. Press MENU
/
to select
FINE
.
2. Hold VOLUME /+ down to fine-tune the TV station
so that the best image is displayed on screen.
or indicates that the TV station is being
fine-tuned.
5.
Press MENU
/
to select
SOUND SYSTEM
.
6.
Press VOLUME /+ to select the appropriate
sound system.
For the sound systems in each country or region, refer to the
table Broadcasting systems.
7.
Press MENU
/
to select
MANUAL
.
8.
Repeat steps 3 to 7 if you want to preset another TV station to a
channel.
9.
Press DISPLAY to turn the display off.
MENU 3
AUTO CH PRESET
MANUAL CH PRESET
LANGUAGE ENGLISH
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
MANUAL
FINE
SKIP NO
SOUND SYSTEM B/G
EXIT
SELECT BY PR 1 VL
PROGRAM BY -+ EXIT BY
SEARCH BY VOL-+
DISPLAY
Channel
No.
MANUAL
FINE
SKIP NO
SOUND SYSTEM B/G
EXIT
SELECT BY PR 3 VL
PROGRAM BY -+ EXIT BY
FINE BY VOL-+
DISPLAY
MANUAL
FINE
SKIP NO
SOUND SYSTEM B/G
EXIT
SELECT BY PR 3 VL
PROGRAM BY -+ EXIT BY
CHANGE BY VOL-+
DISPLAY
LCT0994-001B-H 6/29/01, 4:47 PM7
Black