JVC AV-14FTG2 CRT Television User Manual


 
13
Using the TVs menus
On Timer
Your TV will automatically turn on and
tune into the channel you set after the
period of time you set.
1.
Press MENU
/
to display
the
MENU 1
menu, then
select
ON TIMER
.
MENU 1
INPUT TV
ON TIMER
PR 1 0:00
VNR OFF
PROGRAM BY -+
SELECT BY EXIT BY
OPERATE BY VOL-+
DISPLAY
Channel
No.
2.
Press MENU /+ to select a
channel you want to view
when the TV turns on.
3.
Press VOLUME /+ to select
the period of time after which
you want to turn on the TV.
The On Timer function starts.
Each time you press the button, the
period of time changes in 15 minute
intervals (up to 12 hours).
To cancel the On Timer function,
press the VOLUME /+ button to
set the period of time to
0:00
.
4.
Press DISPLAY to turn the
display off.
If you turn off the TVs main power by
pressing the Main power button, the
On Timer function is canceled.
If you do not turn off the TV after
starting the On Timer function, the
channel will automatically switch to
the channel set for the On Timer
function.
When the time set for the On
Timer function is reached:
The TV automatically turns on and the
channel set for the On Timer function
is displayed.
For safety reasons the TV will
automatically turn off if no operations are
made within approximately two hours after
the TV is turned on with the On Timer
function.
The Off Timer function and Auto Shutoff
function have priority over the On Timer
function.
Input
You can view images from VCRs or
other devices connected to your TV.
1.
Press MENU
/
to display
the
MENU 1
menu, then
select
INPUT
.
MENU 1
INPUT TV
ON TIMER
PR 1 0:00
VNR OFF
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
2.
Press MENU /+ to select the
VIDEO mode.
TV mode changes to VIDEO mode.
LCT0994-001B-H 6/29/01, 4:47 PM13
Black