JVC AV-14FMT4, AV-21CMT4, AV-21DMT4, AV-21YMT4, AV-14AG14, AV-14AMG4, AV-14FMG4, AV-14FMG4B, AV-20NMG4, AV-21CG14, AV-21CMG4, AV-21DMG4, AV-21FMG4B, AV-21LMG4, AV-21TG14, AV-21TMG4, AV-21YMG4 CRT Television User Manual


 
13
TV channel presetting
To register the TV channels auto-
matically
You can register the TV channels into the TV’s
channel list automatically.
1 Display the INSTALL menu.
MENU INSTALL
2 Choose AUTO PROGRAM, then press the
MENU/OK button.
AUTO PROGRAM function starts, and the
channels received are registered in the
channel list (PR list) automatically.
3 “SETUP TOUR RESTART?” appears.
To start the Press the MENU/OK button.
SETUP TOUR Then proceed to step 5 of
“Setting up your TV” on page
7.
To skip the Press the Red button.
SETUP TOUR
4 The EDIT menu appears.
To edit the Proceed to the Step 3 of “To
channel list edit the channel list (PR list)”
on this page.
If a channel is Proceed to the Step 3 of “To
not registered register the channel manually”
on this page.
To exit the menu Press the MENU/OK button.
For details of “SETUP TOUR”, see page 7.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s
channel list manually.
1 Display the INSTALL menu.
MENU INSTALL
2 Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
EDIT
PR CH/CC
7 CH 09
8 CH 11
9 CH 13
10
11
12
13
3
3 Choose the channel which you want to
register.
4 Press the blue button to activate the
MANUAL function.
The sound system of the channel appears
at the right of the CH/CC number.
5 Press the 3 button to choose an appropri-
ate sound system.
For details, see “SOUND SYSTEM” on
page 10.
6 Press the green or red button to search for
the TV channel.
Searching stops when a channel is found
and displayed.
7 Repeat step 5 until your desired TV
channel appears.
If the reception Press the blue or yellow button
is poor to fine tune the TV channel.
If noisy sound Press the 3 button to choose
is heard an appropriate sound system.
8 Press the MENU/OK button to exit the
menu.
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR
numbers will be changed.
1 Display the INSTALL menu.
MENU INSTALL
2 Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
EDIT
PR CH/CC
7 CH 09
8 CH 11
9 CH 13
10
11
12
13
3
3 Choose the channel which you want to
change PR number, or delete.
4 Do the following action:
To change the Press the 3 button. Then move
PR number it to the PR number you want
(MOVE) to use it for the channel.
Finally press the 2 button.
To delete the Press the yellow button.
channel (DELETE)
5 Press the MENU/OK button to exit the
menu.
About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
GGT0037-001A-H-P02-15 5/24/04, 3:06 PM13