Filter
Top Products
7
Basic operation
• The illustration below is for the remote control
RM-C248 supplied with L31 series models. Your
remote control may not look exactly like the
illustrations.
RM-C248 REMOTE CONTROL UNIT
DISPLAY
MENU
POWER
CHANNEL VOLUME
OFF TIMER
TV/VIDEO
PICTURE MODE
CHANNEL SCAN
ECO SENSOR
MUTING
RETURN
123
456
78
0
9
CLOSED
CAPTION
100
1 Press the POWER button to turn
your TV on.
• If your TV does not turn on, press the Main
power button on the TV then press the
POWER button again.
• You can also turn on your TV by pressing
any of the following buttons;
- the CHANNEL m button
- the TV/VIDEO button
2 Select a channel.
■ Press the CHANNEL m button.
• Up/down selection cannot be selected for
channels to which the CHANNEL SKIP
function has been set to skip on. See page
14.
■ Press the Number buttons to enter
the channel number.
• When you want to select a channel num-
ber over 100, enter the two-digit number
after pressing the 100+ button.
3 Press the VOLUME M button to
adjust the sound.
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your TV
for a long time or if you wish to save energy.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 11.
LCT0991-001B-H 11/1/1, 12:34 PM7
Black