Filter
Top Products
TV / VIDEO
TV/VIDEO selects the input mode.
TV/VIDEO
2
0
B U T T O N F U N C T I O N S
100 + BUTTON
The 100+ button accesses all channels
above Channel 99.
To move to Channel 124:
100+
2 (two)
4 (four)
VCR BUTTONS
RM-C754 and RM-C751 Only. This
remote will control your VCR. You can
play, rewind and fast-forward, record,
pause, stop, channel scan, and power
on and off.
Note: The remote is preset to control a
JVC VCR. Put in the code 00 for
a JVC brand VCR. For any other
brand, you must set the manufac-
turer’s code (page 11).
NUMBER BUTTONS
10 KEY PAD
P r ess two of the number buttons to move
to single and double digit channels.
To move to Channel 7:
0 (zero)
7 (seven)
MENU BUTTONS
The MENU buttons allow you to control
the options located in the menu
screens. A complete discussion on
these buttons and on the menu system
is located on page 12.
NOTES :
Only RM-C754
and RM-C751,
universal remote
controls, have VCR
control buttons.
MUTING
The MUTING button turns the sound off
completely when you press it.
MUTING
The sound will turn off
completely.
Note: To re t u r n the the original volume
p r ess MUTING a g a i n .
TV VIDEO
RETURN+
There are two kinds of Return…
Return+ — Set a “Return Channel” to
re t u rn to after scanning with CH A N N E L - / + .
RETURN+ and hold for 3 seconds
Scan with CHANNEL -/+
RETURN+
Note: To cancel a Return channel, pre s s
and hold Return+ for another 3 seconds
until “Return Channel Canceled!” appears.
Return — Return to the last channel
viewed after moving to another channel
via the 10 key pad.
RETURN+
Move to another channel with
the 10 key pad.
RETURN+
Note: When PIP is on, the RE T U R N +
button function affects only the main
screen.
RETURN CHANNEL
PROGRAMMED !