Filter
Top Products
9
Remote control buttons and functions
button
< S series only >
You can select a sound setting for stereo
broadcast programmes and bilingual
programmes.
Press this button to select a sound
setting.
: Stereo sound
: Bilingual I (sub I) sound
: Bilingual II (sub II) sound
: Monaural sound
MONO : Cancels the multi-sound function,
and the sound becomes monaural.
• If you have poor reception of a stereo broad-
cast, you can change from stereo sound (
)
to monaural sound (
) so that you can hear
the broadcast more clearly and easily.
• If the multi-sound function cannot work nor-
mally due to poor signal quality, noise may be
included in the sound, or the sound may change
many times. If this happens, change the sound
setting to MONO mode to cancel the multi-sound
function.
MUTING button
You can turn the sound off instantly.
Press this button.
To turn the sound on, press this button
again.
DISPLAY button
You can continuously display the current
channel number or VIDEO mode on the
screen.
Press this button.
To turn the display off, press this button
again.
• When selecting a VIDEO mode with no signal,
indication of the VIDEO mode becomes fixed
on the screen.
CINEMA SURROUND button
<AV-21LS2/AV-21LX2/AV-29LS2/
AV-29LX2 does not included >
You can enjoy an enhanced sound for a
wider audience by using CINEMA
SURROUND function.
Press this button to select one of the
CINEMA SURROUND mode.
HIGH/LOW:
When you listen to the stereo sound,
please select HIGH mode or LOW mode.
You can enjoy the sound for a wider
audience similar to the experience at the
theatre.
• In case that you setting up the CINEMA SUR-
ROUND function to HIGH mode, there may be
slight volume distortion. In case that occurs,
please switch the HIGH mode to LOW mode,
the effect of CINEMA SURROUND functions will
be less noticeable, however, the volume distor-
tion will be corrected.
MONO SURROUND:
Select the MONO SURROUND mode,
when you listen to the mono sound.
You can enjoy the sound for a wider
audience similar to stereo sound.
OFF:
The CINEMA SURROUND function
switches off.
LCT1170-001B-H 8/21/02, 11:14 AM9