JVC DR-MV79B DVD Recorder User Manual


 
31
RECORDING
T
T
imer Recording
imer Recording
The Timer Recording function allows you to record up
to 16 programs within a period of one month.
1. Press HOME and the Home menu appears.
2. Select [TV] > [Timer Record] and press ENTER.
3. Select [NEW] and press ENTER.
The Timer Record menu will appear.
[Media] – Choose a media (DVD or VCR).
[INPUT] – Choose one of the external inputs
from which to record (AV1 or AV2).
[Date] – Choose a date up to 1 month in
advance, or select a daily or weekly program.
[Start Time] – Set the recording start time.
[End Time] – Set the recording end time.
[Mode] – Choose a record mode.
DVD: XP, SP, LP, EP or AT (Auto)
VCR: SP, SLP or AT (Auto)
AT(Auto) mode determines how much time is avail-
able on the disc or tape and switches record mode,
if necessary, to complete recording the program.
4. Enter the necessary information for your timer
recording(s).
b / B (left/right) – Move the cursor left/right
v / V (up/down) – Change the setting at the
current cursor position.
Press RETURN (O) to return to the [Timer
Record List] menu.
5. Press ENTER to save the program.
6. Press RETURN (O) to exit the [Timer Record
List] menu.
Notes:
•You must insert a recordable disc or tape.
The Timer indicator lights on the front panel
display.
The Recorder will automatically power off when
the Timer Recording ends.
If the unit is DVD mode when the VCR timer record-
ing ends, the unit will not automatically power off.
There is a short delay when a timer recording fin-
ishes to confirm the recorded program. If two
timer recordings are set to record sequentially
(one right after the other), the very beginning of
the later program may not be recorded.
•You must press STOP (x) to stop the Timer
Recording.
Checking Timer Recording Details
Programming can be checked whenever the
Recorder is turned on.
1. Press HOME and the Home menu appears.
2. Select [TV] > [Timer Record] and press ENTER.
3. Use v / V to select a program.
4. Press ENTER to edit the selected program.
Timer Record menu appears.
Canceling a Timer Recording
You can clear a timer setting anytime before the
recording actually starts.
Use v / V to select a program you want to erase
on the [Timer Recorder List] menu, then press
CLEAR and select [OK] then press ENTER.
T
T
imer Recording T
imer Recording T
roubleshooting
roubleshooting
Even though the timer is set, the recorder will not
record when:
There is no disc (or tape) loaded.
•Anon-recordable disc (or tape) is loaded.
Disc Protect is set to [ON] in the Disc menu
(see page 17).
There are already 99 titles (DVD-RW, DVD-R,
DVD-RAM), 49 titles (DVD+RW, DVD+R)
recorded on the disc.
You cannot enter a timer program when:
•Arecording is already underway.
The time you’re trying to set has already
passed.
There are already 16 timer programs set.
If two or more timer programs overlap:
The earlier program takes priority.
When the earlier program finishes, the later
program starts.
If two programs are set to start at exactly the
same time, the program entered first takes
priority.
If the disc is damaged, the recording may not
complete successfully. In this case even though the
Check field shows [Rec. OK], it may not be.