Filter
Top Products
3. Menu Operation
Press “MENU” and it will display menu system
Revolve “OK” to select an item. The selected item will be highlighted display.
Press “OK” to enter the selected item.
Under menu system, press “MENU” to back to previous menu.
The menu will automatically save and quit if it remains idle.
4. Picture Settings Submenu
The Picture Settings Submenu includes:
⑴ CONTRAST: 0-100 value adjustment
⑵ BRIGHTNESS: 0-100 value adjustment
⑶ HUE: 0-100 value adjustment
(Only available under Composite input)
⑷ SATURATION: 0-100 value adjustment
⑸ SHARPNESS: 0-100 value adjustment
⑹ PIC.MODE: User defined and preset picture
modes: standard, soft and vivid selection
5. System Configuration Submenu
The System Configuration Submenu includes:
⑴ RATIO: Select “16:9” or “4:3” to adjust the aspect ratio.
⑵ SCAN: “UNDERSCAN” / “OVERSCAN” selection
⑶ ZOOM: “OFF”, “ZOOM1” and “ZOOM2” selection
ZOOM1: Canon DSLR scale zoom-in
ZOOM2: Pixel to Pixel zoom-in
⑷ MARKER: Select and set the safety mark
scale from 80%, 85%, 90% and 95%.
⑸ FLIP: Select “YES” to enable G-sensor auto
flip.
⑹ RESET: Revolve “OK” to RESET and press to
recover all to factory setting.