Filter
Top Products
Filename [XVC27U_06Index.fm]
Masterpage:Left+
12 EN
Page 12 13 January 2004 1:57 pm
INDEX (cont.)
ON-SCREEN DISPLAY (VCR deck)
If you press ON SCREEN on the Remote when “SUPERIMPOSE” is set to “ON” (੬ pg. 75), various operational
indicators appear on the TV screen.
For On-screen display for DVD deck, refer to “Using the on-screen bar” (੬ pg. 48).
A Operation Mode Indicators
B Tape Speed (SP/EP)
C Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW (3)
or FF (5) from the Stop
mode or perform an Index
Search. (
੬ pg. 30) The
position of “q” in relation to
“B” (beginning) or “E” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
D Index number ੬ pg. 30
E Tape Remaining Time Indicator ੬ pg. 35
F Counter Display
G Audio Mode Display ੬ pg. 32
H SAP Indicator ੬ pg. 35
I Stereo Program Indicator ੬ pg. 35
J Day/Clock Display
K Channel Position Number/Auxiliary Input
Indicator (F-1)
L “Cassette Loaded” Mark
Beginning End
To recall an indication
A Press ON SCREEN.
● All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
B Press ON SCREEN again to clear the display.
● The RECORD/PAUSE indication remains on the screen.
XVC27U_06Index.fm Page 12 Tuesday, January 13, 2004 1:57 PM