Filter
Top Products
JPEG disc playback
25
XV-M5GSL/LET0236-001A/English
JPEG disc
playback
NOTES
• The unit supports the baseline JPEG format.
• The unit does not support “packet writing (UDF format)” discs.
• The unit supports discs recorded with multiple sessions.
• The unit may not be able to read some discs, or may take a long
time to display a picture on the disc, due to disc characteristics,
recording conditions, or numbers of groups (folders), etc.
• Programmed and random playback functions do not work with
JPEG discs.
• The screen saver function will be activated if the same picture is
displayed for more than 5 minutes except during slide show
playback.
• The unit only can play back files with the following file
extensions; “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any other
combination of upper case and lower case letters (such as
“.Jpg”).
• If a JPEG file name includes any 2-byte character, the unit may
not show the file name correctly.
• If a picture has been saved at greater than 640 x 480 pixel
resolution, it may take some time to display the picture.
• The unit does not support pixel size picture of more than 2400
pixels. Make sure that the picture pixel size is 2400 pixels or
less.
To zoom in the picture
1 While in pause mode, press ZOOM.
Pressing ZOOM causes the unit to zoom in on the image.
Each time you press ZOOM, the magnification is doubled
(1.8, 4, 8, 16, 32 and 64 times).
2 Press 5/∞/2/3 to move the zoomed position.
Viewing pictures continuously (slide
show mode)
You can see files (still pictures) one after another automatically.
To start the slide show
Press 3 (SELECT).
The slide show starts from the beginning of the disc.
Each file (still picture) is displayed for approximately 3
seconds.
To stop slide show playback in the middle
Press 7 or MENU.
The TV screen returns to the JPEG CONTROL display.
Pressing 3 (SELECT) resumes slide show playback from the last
picture displayed.
To keep showing the current picture
Press 8 or ENTER.
Pressing 3 (SELECT) resumes the slide show playback.
To select the start point of the slide show
From the JPEG CONTROL display
1 Make sure that the black (cursor) bar is in the
left (group) column.
If it is in the right column, press 2 to move it to the left
column.
2 Press 5/∞ to move the bar to a desired
group.
3 Press 4/¢ to select a desired file.
4 Press 3 (SELECT).
The slide show starts from the specified file.
Direct selection
1 During playback or while stopped, press
TITLE/GROUP.
2 Press the numeric buttons to specify a
desired group number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
3 Press the numeric buttons to specify a
desired file number.
The unit starts slide show playback from the specified file.
If you do not specify a file, the unit starts slide show playback
from the first file in the group.
Repeat function
In the slide show mode, you can repeat playback of JPEG files in
a group or on the disc.
1 While the JPEG CONTROL display is shown,
press REPEAT.
Pressing REPEAT switches the repeat mode.
When the repeat mode is turned on, the [ ] indicator lights
in the display window.
The selected repeat mode is shown on the JPEG CONTROL
display.
REPEAT ALL: All files on the inserted discs are repeated.
REPEAT DISC: All files on the current disc are repeated.
REPEAT GROUP:All files in the current group are repeated.
No indication: The repeat mode is off.
2 Press 3 (SELECT) to start repeat playback.
To stop repeat playback
Press 7.
The repeat mode remains active.
To quit repeat playback
Press 7 or MENU while the JPEG CONTROL display is shown,
and press REPEAT until the repeat mode indication goes off.
XV-M5GSL(J).book Page 25 Monday, May 26, 2003 9:31 PM