Filter
Top Products
14
GENERAL ITEMS
NOTES:
There are two
sections in
Channel
Summary.
To move up and
down a column
(e.g. from
channel to
channel) use the
Channel
m
button.
To move from
item to item (e.g.
from channel
number to add to
lock) use the
arrow up/down
keys.
Noise Muting will
not work while
you operate the
Channel
Summary.
CHANNEL SUMMARY
You can add or delete channels from
the channel scanning. You can also
lock out any “unauthorized” viewers
from one or up to all 181 channels.
To CHANNEL SUMMARY
To operate
ADD
You can manually set channels to
scan that were too weak to be picked
up during Auto Tuner Setup. (If you
have not performed the Auto Tuner
Setup described on page 10, do so
now.) Conversely, if a channel was too
weak to receive a good picture but
was picked up anyway, delete it by
removing the X.
C
HANNEL
–/+ to select the channel
CH ADD : CH ADD
01 X – :06 X –
02 X :07 ––
03 ––:08 ––
04 X – :09 X –
05 X – :10 X –
To the ADD column
To include or delete from scan
Exit when finished
Note: Channels set to scan will be
marked with an X.
Note: Some cable systems experi-
ence interference from radio
frequencies on Cable Channel
95. If you like, you can delete
this channel from scanning by
removing the X.
CHANNEL GUARD - LOCK
To CHANNEL SUMMARY
To operate
To the Lock column
The access code zero (0) to
lock or unlock that channel
CH ADD : CH ADD
01 X – :06 X –
02 X – :07 –
03 X – :08 –
04 X – :09 X –
05 X – :10 X –
Use the Channel
m
button to go to any
other channel you want to lock
Exit when finished
CHANNEL GUARD MESSAGE:
This message appears when a viewer
attempts to watch a guarded channel:
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. –––
To watch a channel you have locked,
enter the lock code using the 10 key
pad.
If the wrong lock code is entered, this
message will flash on the screen:
INVALID LOCK CODE !
GGT0006-21YT11-E5 5/11/03, 9:10 AM14