Filter
Top Products
6
Setting up your TV
CAUTION
• Turn off the equipment including the TV before
connecting.
1 Connecting the aerial cable.
VHF/UHF outdoor aerial
Rear of the TV
To RF
output
To audio
output
To video
output
To aerial input
To S-video
output
The illustration shown is just a sample. It may
not be same as your TV.
VHF/UHF outdoor aerial
Rear of the
TV
VCR
2 Connecting the compatible main plug
to the AC outlet.
3 Inserting batteries into the remote
control.
Insert two batteries by following the ª and
· polarities and inserting the · end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly,
fit new batteries. The supplied batteries are
for testing, not regular use.
If you connect a VCR, connect the aerial
output jack of your VCR and the aerial jack
on the TV with the aerial cable. Then
connect the output jacks of your VCR and the
VIDEO-1 input jacks of the TV with the video
cable and audio cables. For details, see the
manual of your VCR.
4Turn on the TV by pressing the main
power button.
JVC logo appears on the screen.
75 -ohm coaxail cable
(not supplied)
JVC logo will appear on the screen again at
the phase of “SETUP TOUR RESTART?”
function. Then the initial setting can be
performed according to page 7.
GGT0087-001A-H_E P06-09 6/29/05, 10:286