JVC GR-DVL517 DVR User Manual


 
EN13
REC MODE SP
LP
Recording Mode Setting
Set the tape recording mode depending on your preference.
1
Set the Power Switch to while pressing down
the Lock Button located on the switch. The power
lamp lights and the camcorder is turned on.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select
CAMERA and press it. The CAMERA Menu
appears.
4
Rotate the MENU/BRIGHT wheel to select REC
MODE and press it. The Sub Menu appears. Select
SP or LP by rotating the MENU/BRIGHT wheel
and press it. Rotate the MENU/BRIGHT wheel to
select
1
RETURN, and press it twice. The Menu
Screen closes.
Audio Dubbing ( pg. 66) and Insert Editing
( pg. 67) are impossible on a tape recorded in the
LP mode.
•“LP (Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
Display
Menu Screen
Sub Menu
MENU/BRIGHT Wheel
Power Switch
Lock Button
Power Lamp
GR-DVL817 only