JVC HD-56FN98 Projection Television User Manual


 
68
Button Functions
Turns the TV on or off.
Press the P
OWER button
Note:
• After turning the power on, you can not turn the power off for about one minute.
Power
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)
Number Buttons - 10Key Pad
Tune
Selects the signal input source for the television: VIDEO-1, 2, 3, 4, DIGITAL-IN1, DIGITAL-IN2
or i.LINK for video devices like VCRs, DVD players or camcorders.
Press the I
NPUT button
By every press of the I
NPUT button, you can change the input mode.
Notes:
• When you return to TV mode, press the RETURN +/TV button or direct 10 key pad or CHANNEL
+/– button.
You can also access by pressing the INPUT button on the side of the TV instead of the remote
control.
• i.LINK can be selected only when you have an i.LINK device connected.
• If you have a PC connected to the TV, select VIDEO-3.
Input
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
UNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the T
UNE button
LCT2067-002A-A Eng.indd 68LCT2067-002A-A Eng.indd 68 4/17/07 9:17:11 AM4/17/07 9:17:11 AM