JVC HD-56G647 Projection Television User Manual


 
50
Onscreen Menus
This feature is used if you have a DTV or HDMI compatible component connected to your TV.
Press the MENU button
π
To DIGITAL-IN AUDIO
®
To select ANALOG, DIGITAL or AUTO
Press the Menu button when nished
Notes:
• If your DTV or HDMI component is capable of digital
audio and video, choose DIGITAL. If your DTV or HDMI
component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component’s instruction manual for more information.
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
• When you select DIGITAL, select PCM on Digital Sound menu. See page 52.
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(1/5)
DIGITAL-IN
DIGITAL-IN AUDIO
SIZE1
DIGITAL
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
Press the M
ENU button
π
To DIGITAL-IN
®
To enter
π
To select AUTO, SIZE1 or SIZE2
Press the M
ENU button to finish
Digital-In
Digital-in Audio
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(1/5)
DIGITAL-IN
DIGITAL-IN AUDIO
SIZE1
DIGITAL
Notes:
The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.
LCT2061-001C-A ENG.indd 50LCT2061-001C-A ENG.indd 50 12/15/06 10:48:25 AM12/15/06 10:48:25 AM