Filter
Top Products
60
Button Functions
Turns the TV on or off.
Press the P
OWER button
Note: After turning on the power, you can not turn the power off for about one minute.
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)
Power
Number Buttons - 10Key Pad
Tune
Selects the signal input source for the television: INPUT-1, 2, 3 or 4 for video devices like
VCRs, DVD players, or camcorders.
Press the INPUT button
Notes:
• When you return to TV mode, press the R
ETURN +/TV button or direct 10 key pad.
• You can also access by pressing the INPUT button on the side of the TV instead of the remote
control.
• If you have a PC connected to the TV, select VIDEO-3.
Input
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
UNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the TUNE button
Digital-In
Use this button to directly select the digital-in input.
Press the DIGITAL-IN button
• Digital-In on the menu will display only when the 480p picture signal in Digital-In is displayed.
LCT1864-001B-A ENG 60 7/15/05, 12:58:44 PM