JVC HD-52G657 Projection Television User Manual


 
64
Button Functions
The VIDEO STATUS button gives you a choice of four TV picture display settings, including a
display of your own preferences.
Standard - Resets the picture display to the factory settings.
Dynamic - Gives a vivid picture with better contrast when
viewing in a brightly lit room.
Theater - Gives a rich, film-like look to video when viewing in
a dimly lit room.
Game - Used for when you are playing video games
connected to your TV.
Press the V
IDEO STATUS button
By every press of the VIDEO STATUS button, you change the mode.
Note:
You can also change the mode by pressing the
π
buttons.
• Each mode is memorized for each input connected to the TV.
You can also access the FRONT PANEL CONTROL screen by using the MENU button on
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose VIDEO
STATUS by pressing MENU
on the side panel and choose a mode by using the CHANNEL
+/- buttons (
OPERATE
®
).
There are four video status settings: Dynamic, Standard, Theater and Game. Each video
status setting has a separate memory for HD (1080i/720p) and SD (480p/480i) video signal.
Each video status can be chosen along with your favorite picture settings (Tint, Color,
Picture, Bright, Detail, etc.)
When an HD signal is displayed: Your HD settings are recalled for the video status you
are using.
When an SD signal is displayed: Your SD settings are recalled for the video status you
are using.
Video Status
Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, press N
ATURAL CINEMA and set it to AUTO. Natural Cinema helps correct
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
Press the NATURAL CINEMA button
Notes:
• The natural cinema mode is automatically set to “AUTO” in
the following cases:
– Turning on or off
– Changing the channel or input mode
– Using multi-screen functions
Natural Cinema
VIDEO STATUS
STANDARD
DYNAMIC
THEATER
GAME
NATURAL CINEMA
AUTO
ON
OFF
LCT2061-001C-A ENG.indd 64LCT2061-001C-A ENG.indd 64 12/15/06 10:48:30 AM12/15/06 10:48:30 AM