JVC HD-52G887 Projection Television User Manual


 
54
You can confirm the Software Version.
Press the MENU button
π
To DIGITAL SETUP
®
To enter
π
To Software Version
®
To enter
®
Select close when you are finished confirming your software version
Press the MENU button when finished
Software Version
Digital Sound
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
You can select the optical digital sound output, either PCM or Dolby Digital when your TV is
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can
enjoy listening in 5.1ch sound when watching digital broadcasts.
Press the M
ENU button
π
To DIGITAL SETUP
®
To enter
π
To Digital Sound
®
To select PCM or DOLBY DIGITAL
Press the MENU button when finished
Notes:
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it
cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 18.
Onscreen Menus
At first, connect the USB memory into the USB connector. This function will appear only when
the USB memory is inserted into the USB connector.
Press the M
ENU button
π
To DIGITAL SETUP
®
To enter
π
To Software Update
®
To enter
π
Checks the card if it needs an update or not
Press the M
ENU button when finished
Software Update
LCT2063-001C-A ENG.indd 54LCT2063-001C-A ENG.indd 54 8/10/06 8:56:50 AM8/10/06 8:56:50 AM