JVC HR-A230ES VCR User Manual


 
23
Check And Cancel
Programmes
q
6
12
45
3
6
8
0
7
9
1
3
2
OK
CANCEL
START+/–
TV PROG.
DATE+/–
PROG. CHECK
STOP+/–
ACCESS PROGRAMME
DISPLAY
1
Press PROG CHECK. The recording start and stop times
appear on the front display panel. Then press OK and
the date and the preset position appear. Each time you
press PROG CHECK the next program’s information
appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CANCEL.
All information you input is deleted.
REVISE PROGRAMME
INFORMATION
2
Input the appropriate data using the START +/–, STOP
+/–, DATE +/– and TV PROG. +/– buttons on the
remote control.
PDC Recording
Now available from some TV stations, PDC (Programme
Delivery Control) is a service designed to assure safe, accurate
timer recording. With this system, special code signals are
transmitted together with the audio/video signals. These code
signals control your video recorder and have precedence over
advertised times you preset in the timer. This means that your
recorder will start and stop recording when the preset TV
programmes actually start and end — even if the broadcast time
of a preset TV programme is changed.
To Use PDC Service . . .
The default setting for PDC is "ON". To cancel PDC, press :
PDC (NUMBER key “7”) so that the PDC indicator ( ) on the
display panel disappears during Video Plus+ or regular timer
programming.
NOTES:
When you manually enter programmes (regular timer
programming), set the start time (PDC time) exactly as
advertised in the TV listing. A different time than advertised
will result in no recording.
PDC Recording is also possible when a satellite tuner or a
cable box is connected to AV2 IN on your recorder.
: PDC