JVC HR-J256EK VCR User Manual


 
38
Video Plus+ Setup
SUBSIDIARY SETTINGS (cont.)
IMPORTANT
Normally, Auto Set Up ( pg. 8) or Auto Channel Set (pg. 30) sets the Guide Program Numbers automatically. You need to set
the Guide Program Numbers manually only in the following cases.
When timer-programming with Video Plus+, the preset position, where the station you wish to record is received on your
recorder, is not selected.
Set the Guide Program Number for that station manually.
When you add/delete a channel or change preset positions manually after Auto Set Up or Auto Channel Set has taken place.
Set the Guide Program Numbers for all the receivable stations manually.
When you wish to timer-record a satellite programme with Video Plus+.
Set the Guide Program Numbers for all satellite broadcasts received on your satellite receiver.
Turn on the TV and select the VIDEO channel (or AV mode).
Guide Program Number Set
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS INITIAL SET
SCREEN
2
Press
%
to place the pointer next to "INITIAL SET",
then press OK or .
ACCESS GUIDE PROG SET
SCREEN
3
Press
%
to place the pointer next to "GUIDE PROG
SET", then press OK or .
ENTER GUIDE PROG
NUMBER
4
Press
%
or NUMBER
keys to enter the Guide
Program number for the
desired station as shown in
the TV listings. Then press
OK or .
%
(Ex.) When inputting the
Guide Program
number 4 for CH4.
GUIDE PROG SET
GUIDE PROG TV PROG
45
[5
] =
[MENU] : EXIT
%
ENTER RECEIVING PRESET
POSITION NUMBER
5
Press
%
or NUMBER
keys to input the number
of the recorder's preset
position on which the
Guide Program number's
broadcast is received.
Then press OK or .
If the satellite broadcast
is received on your
recorder's auxiliary
channel "L-2", select
"L-2" for the preset position.
• Repeat steps 4 and 5 as necessary.
RETURN TO NORMAL
SCREEN
6
Press MENU.
GUIDE PROG SET
GUIDE PROG TV PROG
44
CH4
[
5
] =
[MENU] : EXIT
(Ex.) If CH4 is received on
preset position 4.
Guide Program Number
"Guide Program (GUIDE PROG) number" refers to the
assigned TV station numbers, according to broadcast area, for
Video Plus+ timer recording. The Guide Program numbers
can be found in most TV listings.
%
%