Filter
Top Products
42 EN
SUBSIDIARY SETTINGS (cont.)
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set "ON" or "OFF" at the Clock
Set screen (the default setting is "OFF"). Press OK until the
Just Clock setting begins blinking, then press %fi to change
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
recorder's built-in clock may be reduced, which could
adversely effect timer recording. We recommend you to
keep Just Clock on. In cases where the clock setting data
from a PDC signal is incorrect, however, you are advised to
keep Just Clock set to "OFF".
TURN THE RECORDER ON
1
Press .
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS INITIAL SET
SCREEN
3
Place the pointer next to "INITIAL SET" by pressing %fi,
then press OK or .
ACCESS CLOCK SET
SCREEN
4
Place the pointer next to "CLOCK SET" by pressing %fi,
then press OK or . The Clock Set screen appears.
SET DATE AND TIME
5
Press %fi to set the time, then press OK or . The
"date" display begins blinking. Repeat the same
procedure to set the date and year.
● When you set the time, press and hold %fi to
change the time by 30 minutes.
● When you set the date, press and hold %fi to
change the date by 15 days.
SET JUST CLOCK
6
The default setting is “OFF”. Set as desired by pressing
%fi, then press OK or .
● For the Just clock function, ੬ "Just Clock" in the left
column.
● If you set to “OFF”, you can disregard the next step as
you won’t be able to receive regular clock adjustments.
INITIAL SET
CLOCK SET
GUIDE PROG SET
[5∞] =
[MENU] : EXIT
CLOCK SET
TIME DATE YEAR
0: 00 01 . 01 98
JUST CLOCK :OFF
TV PR. : 1
[5
∞
] =
[MENU] : EXIT
Clock Set
Turn on the TV and select the VIDEO channel (or AV mode).
%
IMPORTANT
If you performed Auto Set Up (੬ pg. 4) or Auto Channel
Set (੬ pg. 34), without ever having set the clock previ-
ously, the recorder's built-in clock is also set automatically.
Perform the following steps only if —
— Auto Clock Set has not been performed correctly by
Auto Set Up or Auto Channel Set.
or
— the recorder's memory backup has expired.
or
— you want to change Just Clock setting (੬ "Just Clock"
in the left column).
%
123
456
7
89
0
2
4
1
3
?
%
%
OK
MENU