Filter
Top Products
Filename [HRJ480EU1.fm]
Masterpage:Right
EN
5
FRONT DISPLAY PANEL
A
“Timer” Indicator
੬
pg. 23, 25
B
Play Indicator
C
Record Indicator
D
Channel/Clock Display
੬
pg. 11
To switch display, press
– –:– –
. Channel position is not
displayed during playback.
Mode Display (L-1, L-2 or SAt*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 37
), “SAt” appears
instead of “L-2”.
E
Instant REVIEW Indicator
੬
pg. 16
F
VCR Indicator
੬
pg. 19
G
SAT
#
Indicator
੬
pg. 28
ON-SCREEN DISPLAY
When “O.S.D.” is set to “ON” (
੬
pg. 35), various
operational indicators appear on the TV screen.
A
Operation mode indicators
B
Tape speed SP/LP/EP (HR-J480EU only)
* EP is for NTSC playback only.
C
Tape direction
D
Counter display
੬
pg. 20
E
Tape remaining time indicator
੬
pg. 20
F
Tape position indicator
The tape position indicator
appears on the TV screen
when you press
3
or
5
from the Stop mode
or perform an Index Search
(
੬
pg. 17). The position of
“
q
” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape used, the tape position
indicator may not appear correctly.
G
VPS/PDC Indicator
੬
pg. 23, 25
H
Current day/month/year
I
Clock display
J
Channel position number and station name/
Auxiliary input indicator (L-1, L-2 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 37), “SAT” appears
instead of “L-2”.
K
Timer warning display
A warning appears on the TV screen to tell you that the
timer-recording is to start in 5 minutes if you’re not in the
Timer mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
&
.
L
Cassette loaded mark
Beginning End
HRJ480EU1.fm Page 5 Friday, January 12, 2001 10:50 AM