Filter
Top Products
Filename [HRJ680EU1.fm]
Masterpage:Left
18
EN
PLAYBACK (cont.)
Manual Tracking
Your video recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the PR buttons.
1
Override automatic tracking.
Press
p
on the remote control.
2
Adjust the tracking manually.
Press PR + or –.
3
Return to automatic tracking.
Press
p
on the remote control.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Activate Instant ReView.
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
● The front display panel tells you how many programmes have
been timer-recorded. If you have, for example, 3 programmes,
the Instant REVIEW indicator and “3” blink. To watch the first
of the 3 programmes, press REVIEW three times
. The recorder
searches and begins playback automatically. You can access a
programme as far as 9 index codes away from the current tape
position.
● The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Programme
Recording (
੬
pg. 30).
HRJ680EU1.fm Page 18 Wednesday, December 6, 2000 4:26 PM